USB Device Not Recognized — How to Fix It
Windows says 'USB device not recognized' and the device does nothing. Here is a logical set of checks that resolve this in most cases.
On this page
The 'USB Device Not Recognized' error can appear for several reasons — a glitchy port, a power issue, a missing driver, or occasionally a fault in the device itself. These steps cover all the common causes.
Try a Different Port and Cable
This sounds obvious, but it solves the problem more often than anything else. Plug the device into a different USB port — ideally one on the back of a desktop, which tends to have more reliable power. If you are using a hub, try connecting directly to the computer. Try a different cable if you have one.
Restart and Re-plug
Shut Windows down completely (not sleep or restart) and power it back on. Once Windows has fully loaded, plug the USB device in again. A full power cycle clears temporary states that confuse the USB controller.
Check Device Manager
- Right-click the Start button and choose Device Manager.
- Look for anything under Universal Serial Bus controllers or Other devices with a yellow warning triangle.
- Right-click that entry and choose Update driver. If updating does not help, choose Uninstall device, unplug the USB device, wait ten seconds, plug it back in, and let Windows find a driver.
Disable USB Selective Suspend
Windows can cut power to USB ports to save energy, which sometimes confuses devices. Go to Control Panel > Power Options, click Change plan settings next to your current plan, then Change advanced power settings. Expand USB settings > USB selective suspend setting and set it to Disabled.
Check for Windows Updates
Go to Settings > Windows Update and install any pending updates, including optional driver updates. USB chipset drivers are sometimes delivered this way.
If the device still will not show up, ask us with the make and model of the device and we will take a closer look.
Frequently asked questions
The same USB stick works on another computer but not mine. Is my port broken?
Not necessarily. Try updating the USB host controller driver in Device Manager. Also check if the port works with a different device — if nothing works in that port, the port itself may have failed, but if other devices work fine there, the issue is likely a driver or compatibility problem specific to that USB stick.
Windows says 'device malfunctioned' rather than 'not recognized' — is that different?
Yes, slightly. 'Malfunctioned' usually points to a driver or power problem rather than a connection issue. Try the USB selective suspend fix described above, then uninstall the device in Device Manager and reconnect it. If the message persists, try the device on another PC to rule out a hardware fault with the device itself.
Comments & Questions (0)
No comments yet — be the first to ask. Comments appear after review.
Leave a comment
Your comment appears after our team approves it. Or sign in to post faster.